Jackd Troubles

classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|

Jackd Troubles

Kalessin
I'm sorry, this list may be not the right place to expose my problem but
after two hours of research I haven't found any clue.

I'm trying to set up jack to drive my ESI Juli@ wich I use, at the
moment, to simply listen music.

I'm using Debian Lenny :

alsa-base 1.0.16-1
alsa-firmware-loaders 1.0.15-2
alsa-oss 1.0.15-1
alsa-tools 1.0.15-2
alsa-tools-gui 1.0.15-2
alsa-utils 1.0.15-3
jack-tools 0.0.2-4.1
jackd 0.109.2-1
qjackctl 0.3.2-1

I launch jackd with this command line (done with qjackctl) :

jackd -p128 -t5000 -dalsa -dhw:1 -r44100 -p128 -n2 -D -Phw:1,0

kalessin@Kalessin:~$ jackd -p128 -t5000 -dalsa -dhw:1 \
> -r44100 -p128 -n2 -D -Phw:1,0
jackd 0.109.2
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details

JACK compiled with System V SHM support.
loading driver ..
apparent rate = 44100
creating alsa driver ... hw:1,0|hw:1|128|2|44100|0|0|nomon|swmeter|-|
32bit
control device hw:1
configuring for 44100Hz, period = 128 frames (2.9 ms), buffer = 2
periods
ALSA: final selected sample format for capture: 32bit little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 32bit little-endian
ALSA: use 2 periods for playback


**** alsa_pcm: xrun of at least 3.356 msecs

ALSA: poll time out, polled for 4353128 usecs
DRIVER NT: could not run driver cycle
jack main caught signal 12
no message buffer overruns
kalessin@Kalessin:~$

I can't figure out why It doesn't work.

Best Regards.

--
Louis Opter, aka, Kalessin - Clef PGP : 0x58AA6712

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Jackit-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/jackit-devel

signature.asc (196 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: Jackd Troubles

Pieter Palmers
Kalessin wrote:

> I'm sorry, this list may be not the right place to expose my problem but
> after two hours of research I haven't found any clue.
>
> I'm trying to set up jack to drive my ESI Juli@ wich I use, at the
> moment, to simply listen music.
>
> I'm using Debian Lenny :
>
> alsa-base 1.0.16-1
> alsa-firmware-loaders 1.0.15-2
> alsa-oss 1.0.15-1
> alsa-tools 1.0.15-2
> alsa-tools-gui 1.0.15-2
> alsa-utils 1.0.15-3
> jack-tools 0.0.2-4.1
> jackd 0.109.2-1
> qjackctl 0.3.2-1
>
> I launch jackd with this command line (done with qjackctl) :
>
> jackd -p128 -t5000 -dalsa -dhw:1 -r44100 -p128 -n2 -D -Phw:1,0

what happens if you use the more simple command line:
jackd -v -dalsa -dhw:1 -r44100
?

Greets,

Pieter

>
> kalessin@Kalessin:~$ jackd -p128 -t5000 -dalsa -dhw:1 \
>> -r44100 -p128 -n2 -D -Phw:1,0
> jackd 0.109.2
> Copyright 2001-2005 Paul Davis and others.
> jackd comes with ABSOLUTELY NO WARRANTY
> This is free software, and you are welcome to redistribute it
> under certain conditions; see the file COPYING for details
>
> JACK compiled with System V SHM support.
> loading driver ..
> apparent rate = 44100
> creating alsa driver ... hw:1,0|hw:1|128|2|44100|0|0|nomon|swmeter|-|
> 32bit
> control device hw:1
> configuring for 44100Hz, period = 128 frames (2.9 ms), buffer = 2
> periods
> ALSA: final selected sample format for capture: 32bit little-endian
> ALSA: use 2 periods for capture
> ALSA: final selected sample format for playback: 32bit little-endian
> ALSA: use 2 periods for playback
>
>
> **** alsa_pcm: xrun of at least 3.356 msecs
>
> ALSA: poll time out, polled for 4353128 usecs
> DRIVER NT: could not run driver cycle
> jack main caught signal 12
> no message buffer overruns
> kalessin@Kalessin:~$
>
> I can't figure out why It doesn't work.
>
> Best Regards.
>
>
>
> ------------------------------------------------------------------------
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Jackit-devel mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/jackit-devel


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Jackit-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/jackit-devel
Reply | Threaded
Open this post in threaded view
|

Re: Jackd Troubles

Kalessin
With jackd -v -dalsa -dhw:1 -r44100 jackd launch but crash few seconds
after.

It seems to be related with --period option, by increasing the period
value, I increase the time before jackd crash. Always by catching a
signal 12 (SIGUSR1 ?).

Best Regards,

Louis

Le dimanche 16 mars 2008 à 10:23 +0100, Pieter Palmers a écrit :

> Kalessin wrote:
> > I'm sorry, this list may be not the right place to expose my problem but
> > after two hours of research I haven't found any clue.
> >
> > I'm trying to set up jack to drive my ESI Juli@ wich I use, at the
> > moment, to simply listen music.
> >
> > I'm using Debian Lenny :
> >
> > alsa-base 1.0.16-1
> > alsa-firmware-loaders 1.0.15-2
> > alsa-oss 1.0.15-1
> > alsa-tools 1.0.15-2
> > alsa-tools-gui 1.0.15-2
> > alsa-utils 1.0.15-3
> > jack-tools 0.0.2-4.1
> > jackd 0.109.2-1
> > qjackctl 0.3.2-1
> >
> > I launch jackd with this command line (done with qjackctl) :
> >
> > jackd -p128 -t5000 -dalsa -dhw:1 -r44100 -p128 -n2 -D -Phw:1,0
>
> what happens if you use the more simple command line:
> jackd -v -dalsa -dhw:1 -r44100
> ?
>
> Greets,
>
> Pieter
>
> >
> > kalessin@Kalessin:~$ jackd -p128 -t5000 -dalsa -dhw:1 \
> >> -r44100 -p128 -n2 -D -Phw:1,0
> > jackd 0.109.2
> > Copyright 2001-2005 Paul Davis and others.
> > jackd comes with ABSOLUTELY NO WARRANTY
> > This is free software, and you are welcome to redistribute it
> > under certain conditions; see the file COPYING for details
> >
> > JACK compiled with System V SHM support.
> > loading driver ..
> > apparent rate = 44100
> > creating alsa driver ... hw:1,0|hw:1|128|2|44100|0|0|nomon|swmeter|-|
> > 32bit
> > control device hw:1
> > configuring for 44100Hz, period = 128 frames (2.9 ms), buffer = 2
> > periods
> > ALSA: final selected sample format for capture: 32bit little-endian
> > ALSA: use 2 periods for capture
> > ALSA: final selected sample format for playback: 32bit little-endian
> > ALSA: use 2 periods for playback
> >
> >
> > **** alsa_pcm: xrun of at least 3.356 msecs
> >
> > ALSA: poll time out, polled for 4353128 usecs
> > DRIVER NT: could not run driver cycle
> > jack main caught signal 12
> > no message buffer overruns
> > kalessin@Kalessin:~$
> >
> > I can't figure out why It doesn't work.
> >
> > Best Regards.
> >
> >
> >
> > ------------------------------------------------------------------------
> >
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Jackit-devel mailing list
> > [hidden email]
> > https://lists.sourceforge.net/lists/listinfo/jackit-devel
>
>
--
Louis Opter, aka, Kalessin - Clef PGP : 0x58AA6712

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Jackit-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/jackit-devel

jackd.out (5K) Download Attachment
signature.asc (196 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: Jackd Troubles

Kalessin
I still don't understand what I'm doing wrong :(

Louis.

Le dimanche 16 mars 2008 à 15:30 +0000, Kalessin a écrit :

> With jackd -v -dalsa -dhw:1 -r44100 jackd launch but crash few seconds
> after.
>
> It seems to be related with --period option, by increasing the period
> value, I increase the time before jackd crash. Always by catching a
> signal 12 (SIGUSR1 ?).
>
> Best Regards,
>
> Louis
>
> Le dimanche 16 mars 2008 à 10:23 +0100, Pieter Palmers a écrit :
> > Kalessin wrote:
> > > I'm sorry, this list may be not the right place to expose my problem but
> > > after two hours of research I haven't found any clue.
> > >
> > > I'm trying to set up jack to drive my ESI Juli@ wich I use, at the
> > > moment, to simply listen music.
> > >
> > > I'm using Debian Lenny :
> > >
> > > alsa-base 1.0.16-1
> > > alsa-firmware-loaders 1.0.15-2
> > > alsa-oss 1.0.15-1
> > > alsa-tools 1.0.15-2
> > > alsa-tools-gui 1.0.15-2
> > > alsa-utils 1.0.15-3
> > > jack-tools 0.0.2-4.1
> > > jackd 0.109.2-1
> > > qjackctl 0.3.2-1
> > >
> > > I launch jackd with this command line (done with qjackctl) :
> > >
> > > jackd -p128 -t5000 -dalsa -dhw:1 -r44100 -p128 -n2 -D -Phw:1,0
> >
> > what happens if you use the more simple command line:
> > jackd -v -dalsa -dhw:1 -r44100
> > ?
> >
> > Greets,
> >
> > Pieter
> >
> > >
> > > kalessin@Kalessin:~$ jackd -p128 -t5000 -dalsa -dhw:1 \
> > >> -r44100 -p128 -n2 -D -Phw:1,0
> > > jackd 0.109.2
> > > Copyright 2001-2005 Paul Davis and others.
> > > jackd comes with ABSOLUTELY NO WARRANTY
> > > This is free software, and you are welcome to redistribute it
> > > under certain conditions; see the file COPYING for details
> > >
> > > JACK compiled with System V SHM support.
> > > loading driver ..
> > > apparent rate = 44100
> > > creating alsa driver ... hw:1,0|hw:1|128|2|44100|0|0|nomon|swmeter|-|
> > > 32bit
> > > control device hw:1
> > > configuring for 44100Hz, period = 128 frames (2.9 ms), buffer = 2
> > > periods
> > > ALSA: final selected sample format for capture: 32bit little-endian
> > > ALSA: use 2 periods for capture
> > > ALSA: final selected sample format for playback: 32bit little-endian
> > > ALSA: use 2 periods for playback
> > >
> > >
> > > **** alsa_pcm: xrun of at least 3.356 msecs
> > >
> > > ALSA: poll time out, polled for 4353128 usecs
> > > DRIVER NT: could not run driver cycle
> > > jack main caught signal 12
> > > no message buffer overruns
> > > kalessin@Kalessin:~$
> > >
> > > I can't figure out why It doesn't work.
> > >
> > > Best Regards.
> > >
> > >
> > >
> > > ------------------------------------------------------------------------
> > >
> > > -------------------------------------------------------------------------
> > > This SF.net email is sponsored by: Microsoft
> > > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > >
> > >
> > > ------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > Jackit-devel mailing list
> > > [hidden email]
> > > https://lists.sourceforge.net/lists/listinfo/jackit-devel
> >
> >
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________ Jackit-devel mailing list [hidden email] https://lists.sourceforge.net/lists/listinfo/jackit-devel
--
Louis Opter, aka, Kalessin - Clef PGP : 0x58AA6712

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Jackit-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/jackit-devel

signature.asc (196 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: Jackd Troubles

Jack O'Quin
On Tue, Mar 18, 2008 at 3:28 AM, Kalessin <[hidden email]> wrote:
> I still don't understand what I'm doing wrong :(

Maybe your system is not able to handle a 128 frame period.

What happens if you set "-p1024"?
--
 joq

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Jackit-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/jackit-devel
Reply | Threaded
Open this post in threaded view
|

Re: Jackd Troubles

Kalessin
By increasing the period value, I increase the time before jackd crash.
Always by catching a signal 12 (SIGUSR1 ?) :/

My box is an AMD Athlon X2 @ 2,7ghz on a DFI NF4 with 2 gb of ram. I
think it's enough power :°.

Best Regards

Le mardi 18 mars 2008 à 08:09 -0500, Jack O'Quin a écrit :
> On Tue, Mar 18, 2008 at 3:28 AM, Kalessin <[hidden email]> wrote:
> > I still don't understand what I'm doing wrong :(
>
> Maybe your system is not able to handle a 128 frame period.
>
> What happens if you set "-p1024"?
--
Louis Opter, aka, Kalessin - Clef PGP : 0x58AA6712

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Jackit-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/jackit-devel

signature.asc (196 bytes) Download Attachment